GF-R30-IKZ-HB
solid carbide thread milling cutters for internal threads
Article number GF162211.0303
Machining of internal threads.
Product features and benefits:
Smooth milling operation thanks to flutes with 30° helix angle.Predrilled tap hole necessary.Pitch-dependent.Cross-dimensional.For internal threads the diameter of the end mill should be smaller than 2/3 or 3/4 of the thread diameter.
International Material Comparison- thread symbol:
- MF
- nominal diameter [in]:
- 0.47 " - 0.551 "
- nominal diameter d₁ [mm]:
- 11.95 mm - 14 mm
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-R30
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 70 mm
- shank diameter d₂:
- 10 mm
- length of cutting edge l₂:
- 17.211 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 9.9
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- MF
- nominal diameter [in]:
- 0.47 " - 0.551 "
- nominal diameter d₁ [mm]:
- 11.95 mm - 14 mm
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-R30
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 70 mm
- shank diameter d₂:
- 10 mm
- length of cutting edge l₂:
- 17.211 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 9.9
- clamping length l₄:
- 40 mm
- cutting material:
- carbide
thread symbol
MF
nominal diameter [in]
0.47 " - 0.551 "
nominal diameter d₁ [mm]
11.95 mm - 14 mm
pitch [mm]
1.5 mm
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-R30
coolant supply
IKZ
helix direction
R30
clamping flat
HB
shank standard
DIN 6535
direction of tool rotation
RH
Coating
without
OAL l₁
70 mm
shank diameter d₂
10 mm
length of cutting edge l₂
17.211 mm
flutes /number of ridges
4
diameter of milling part dF
9.9
clamping length l₄
40 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.