Clamping Mandrel

For clamping impeller wheels.

Article number HD400004

Mounting position: horizontal

Clamping system SG

The clamping mandrel is designed for milling the outer contour, as well as for a turning operation of the flat faces of the workpiece.

Functional description:

Clamping is initiated on the spindle side via a drawbar on the machine side and is transmitted to the two clamping bushes (system SG) via a clamping bolt. These clamping bushes are decoupled by an intermediate bush and can expand differently. Inaccuracies in the bore can be compensated by clamping in two planes.

Advantages:

- Compensation of bore inaccuracies by means of two decoupled clamping bushes
- Machining of different workpiece lengths thanks to quick-change end stops

Details

category:: Clamping Mandrel
machining:: turning, milling
workpiece:: wheel
industry:: pump
clamping-Ø:: 60,00 mm
connection spindle side:: cylinder ≤ 300
fitting position:: horizontal
concentricity at control workpiece :: 0,010 mm
transferable torque:: 150 Nm
outer-Ø:: 320,00 mm
overall length:: 320,00 mm
weight clamping device:: 36 kg
weight workpiece:: 28 kg
material workpiece:: steel

Downloads

Technical details

category:: Clamping Mandrel
machining:: turning, milling
workpiece:: wheel
industry:: pump
clamping-Ø:: 60,00 mm
connection spindle side:: cylinder ≤ 300
fitting position:: horizontal
concentricity at control workpiece :: 0,010 mm
transferable torque:: 150 Nm
outer-Ø:: 320,00 mm
overall length:: 320,00 mm
weight clamping device:: 36 kg
weight workpiece:: 28 kg
material workpiece:: steel