Clamping Mandrel

For clamping telescopic sights (main tubes).

Article number HD400002

Mounting position: horizontal with tailstock

Clamping system SG

The clamping mandrel is designed for a turning operation of the outer contour, as well as for milling and drilling the workpiece.

Functional description:

Clamping is initiated via a drawbar on the machine side and is transmitted to the clamping bush (system SG) via a clamping bolt. The workpiece is supported via a moving centring head on the tailstock side.

Advantages:

- low-deformation clamping of very thin-walled components
- uniform distribution of the clamping force over the entire clamping length

Details

category:: Clamping Mandrel
machining:: drill, turning, milling
workpiece:: bush
industry:: optics & micro
clamping-Ø:: 36,00 mm
connection spindle side:: short taper 6
connection tailstock side:: cylinder ≤ 170
fitting position:: horizontally with tailstock
repeat accuracy at control workpiece :: 0,008 mm
transferable torque:: 27,5 Nm
outer-Ø:: 190,00 mm
overall length:: 236,00 mm
weight clamping device:: 14 kg

Downloads

Technical details

category:: Clamping Mandrel
machining:: drill, turning, milling
workpiece:: bush
industry:: optics & micro
clamping-Ø:: 36,00 mm
connection spindle side:: short taper 6
connection tailstock side:: cylinder ≤ 170
fitting position:: horizontally with tailstock
repeat accuracy at control workpiece :: 0,008 mm
transferable torque:: 27,5 Nm
outer-Ø:: 190,00 mm
overall length:: 236,00 mm
weight clamping device:: 14 kg