TRAPEZ-AM-VA-NT
single-finishing trapezoidal taps, NC-suitable
Article number G0303000.7043
-
Hole type: through hole
HSSE trapezoidal single-cut tap for applications in many materials.
Product features and benefits:
Increased profile clearance angle reduces friction and thus the tendency to cold press welding.Must be cut with a consistent pitch.
International Material Comparison- thread symbol:
- TR
- nominal diameter d₁ [mm]:
- 10 mm
- pitch [mm]:
- 2 mm
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- special
- flute characteristic:
- Rekord C - left-hand spiral flutes L05-L25
- Geometry:
- VA
- Coating:
- NT
- shank diameter d₂:
- 7 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 43 mm
- square ◘:
- 5.5 mm
- tap hole diameter:
- 8.2 mm
- coolant-lubricant:
- thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- TR
- nominal diameter d₁ [mm]:
- 10 mm
- pitch [mm]:
- 2 mm
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- special
- flute characteristic:
- Rekord C - left-hand spiral flutes L05-L25
- Geometry:
- VA
- Coating:
- NT
- shank diameter d₂:
- 7 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 43 mm
- square ◘:
- 5.5 mm
- tap hole diameter:
- 8.2 mm
- coolant-lubricant:
- thread cutting oil
- cutting material:
- HSSE
thread symbol
TR
nominal diameter d₁ [mm]
10 mm
pitch [mm]
2 mm
thread sense of rotation
right hand
coolant supply
without
chamfer form
special
flute characteristic
Rekord C - left-hand spiral flutes L05-L25
Geometry
VA
Coating
NT
shank diameter d₂
7 mm
OAL l₁
110 mm
length of cutting edge l₂
43 mm
square ◘
5.5 mm
tap hole diameter
8.2 mm
coolant-lubricant
thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.