Solid Carbide End Mill TiNox-Cut “Base”
2566T
-
_Web_Typ_N.svg)
without chip breaker
_Web_Stirnkontur_Kantenbruch.svg)
Corner protection chamfer (bevelled edge) for stabilisation of the edge
_Web_Vorschub_axial-radial-diagonal.svg)
Recommended feed directions of the respective cutters
_Web_Rampenwinkel_1-3.svg)
Recommended ramping angle
Universal carbide end mill TiNox-Cut Base in short version for roughing and finishing of stainless and acid-resistant steels.
Product features and benefits:
The special geometry with variable pitch enables a smooth run and vibration-free operation.Latest coating in combination with a high-performance carbide substrate enables dry machining in some cases.
International Material Comparison- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35/37 deg
Technical details
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35/37 deg
cutting material
carbide
category
End Mill
version
Flat Face (Bevelled Edge)
tool interface
straight shank
tool interface norm
DIN 6535
coating
TIN / TIALN
internal coolant supply
without internal cooling
helix angle
35/37 deg
_6820.jpg)
_6800.jpg)
_6491.jpg)
_6476.jpg)