VHM-EF-Drill-STEEL-8xD-HA-IK-4FF-TIALN-T14
EF-Drill twist drills
Article number TA223344.0820
-
Possible drilling depth
Solid carbide twist drill EF-Drill, 8xD, in STEEL geometry for use in steels, cast iron and non-ferrous materials.
Product features and benefits:
Internal cooling channels for high process reliability.Four margins for improved guidance and hole quality.
International Material Comparison- nominal diameter [in]:
- 0.323 "
- nominal diameter d₁ [mm]:
- 8.2 mm
- shank style:
- HA
- type:
- Twist drills
- coolant supply:
- internal coolant supply
- Geometry:
- STEEL
- number of margins:
- 4
- Type of construction standard:
- 8xD EMUGE Standard
- Coating:
- TIALN-T14
- OAL l₁:
- 141 mm
- shank diameter d₂:
- 10 mm
- Flute lenght l₂:
- 100 mm
- usable length l₃:
- 80 mm
- Clamping length l₄:
- 40 mm
- Center length l₅:
- 1.7 mm
- tool - sense of rotation:
- right hand
- tolerance work piece:
- IT9-IT11
- point angle:
- 135 deg
- cutting tolerance:
- m7
- shank diameter tolerance:
- h6
- cutting material:
- carbide
Technical details
- nominal diameter [in]:
- 0.323 "
- nominal diameter d₁ [mm]:
- 8.2 mm
- shank style:
- HA
- type:
- Twist drills
- coolant supply:
- internal coolant supply
- Geometry:
- STEEL
- number of margins:
- 4
- Type of construction standard:
- 8xD EMUGE Standard
- Coating:
- TIALN-T14
- OAL l₁:
- 141 mm
- shank diameter d₂:
- 10 mm
- Flute lenght l₂:
- 100 mm
- usable length l₃:
- 80 mm
- Clamping length l₄:
- 40 mm
- Center length l₅:
- 1.7 mm
- tool - sense of rotation:
- right hand
- tolerance work piece:
- IT9-IT11
- point angle:
- 135 deg
- cutting tolerance:
- m7
- shank diameter tolerance:
- h6
- cutting material:
- carbide
nominal diameter [in]
0.323 "
nominal diameter d₁ [mm]
8.2 mm
shank style
HA
type
Twist drills
coolant supply
internal coolant supply
Geometry
STEEL
number of margins
4
Type of construction standard
8xD EMUGE Standard
Coating
TIALN-T14
OAL l₁
141 mm
shank diameter d₂
10 mm
Flute lenght l₂
100 mm
usable length l₃
80 mm
Clamping length l₄
40 mm
Center length l₅
1.7 mm
tool - sense of rotation
right hand
tolerance work piece
IT9-IT11
point angle
135 deg
cutting tolerance
m7
shank diameter tolerance
h6
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.