GF-Ext.-IKZ-HA
solid carbide thread milling cutters for external thread
Article number GF161721.9514
Machining of external threads.
Product features and benefits:
Tool with straight flutes.Pre-machined bolt required.Pitch-dependent.Cross-dimensional.The milling cutter diameter should be smaller than the thread diameter.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter [in]:
- 0.394 " - 39.331 "
- nominal diameter d₁ [mm]:
- 10 mm - 999 mm
- pitch [mm]:
- 1.5 mm
- thread orientation:
- external
- basic version:
- GF - thread milling cutter
- type:
- GF
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 80 mm
- shank diameter d₂:
- 12 mm
- length of cutting edge l₂:
- 21.75 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 11.9
- clamping length l₄:
- 45 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter [in]:
- 0.394 " - 39.331 "
- nominal diameter d₁ [mm]:
- 10 mm - 999 mm
- pitch [mm]:
- 1.5 mm
- thread orientation:
- external
- basic version:
- GF - thread milling cutter
- type:
- GF
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- without
- OAL l₁:
- 80 mm
- shank diameter d₂:
- 12 mm
- length of cutting edge l₂:
- 21.75 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 11.9
- clamping length l₄:
- 45 mm
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter [in]
0.394 " - 39.331 "
nominal diameter d₁ [mm]
10 mm - 999 mm
pitch [mm]
1.5 mm
thread orientation
external
basic version
GF - thread milling cutter
type
GF
coolant supply
IKZ
helix direction
straight
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
without
OAL l₁
80 mm
shank diameter d₂
12 mm
length of cutting edge l₂
21.75 mm
flutes /number of ridges
4
diameter of milling part dF
11.9
clamping length l₄
45 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.