Milling Technology - Indexable milling cutters and inserts
-
Radius to be programmed in CAMRecommended feed directions of the respective cuttersRecommended ramping angleHolders for screw-in end mills
- category:
- Time-S4-Cut
- version:
- Milling Body for Inserts
- internal coolant supply:
- ICR
-
Recommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Rhombic
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Radius to be programmed in CAM
- cutting material:
- PE6
- category:
- Time-S4-Cut
- version:
- Indexable Insert
- coating:
- TIALN
-
Recommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Round
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Recommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Round
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Recommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Round
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Radius to be programmed in CAMRecommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Time-S-Cut
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Radius to be programmed in CAMRecommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Time-S4-Cut
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Radius to be programmed in CAMRecommended feed directions of the respective cuttersRecommended ramping angleHolders for shell-type milling cutters
- category:
- Time-S-Cut
- version:
- Milling Body for Inserts
- tool interface:
- Bore with Standard Driving Slot
- tool interface norm:
- DIN 138
- internal coolant supply:
- ICR
-
Radius to be programmed in CAM
- cutting material:
- PE6
- category:
- Time-S4-Cut
- version:
- Indexable Insert
- coating:
- ALO
Shell-type milling cutter body for high-feed milling with Time-S-Cut indexable inserts (IC 8.5).
Shell-type milling cutter body, DIN 138, for roughing and finishing applications with rhombic indexable inserts (IC 9.2).
Time-S4-Cut carbide indexable insert (IC 8.5) for high-feed milling of 2D and 3D contours in low-alloy steel materials.
Shell-type milling cutter body, DIN 138, for roughing and finishing applications with round indexable inserts (IC 12).
Shell-type milling cutter body, DIN 138, for roughing and finishing applications with round indexable inserts (IC 10).
Shell-type milling cutter body, DIN 138, for roughing and finishing applications with round indexable inserts (IC 16).
Shell-type milling cutter body DIN 138, for high-feed milling with Time-S-Cut indexable inserts (IC 12.5).
Shell-type milling cutter body DIN 138, for high-feed milling with Time-S-Cut indexable inserts (IC 8.5).
Shell-type milling cutter body DIN 138, for high-feed milling with Time-S-Cut indexable inserts (IC 8).
Time-S4-Cut carbide indexable insert (IC 8.5) for high-feed milling of 2D and 3D contours in steel and cast iron materials.