Clamping Mandrel
For clamping rotor shafts of an electric motor.
Article number HD400017
-
_Web_Einbaulage_horizontal.svg)
Mounting position: horizontal
_Web_Spannsystem_SG.svg)
Clamping system SG
_Web_Spannsystem_SK.svg)
Clamping system SK
The clamping mandrel is designed for turning the inner and outer contour, as well as the flat face of the workpiece.
Functional description:
Clamping is initiated via two drawbars on the machine side. The inner drawbar actuates four wedge jaws (SK system) via a clamping bolt for clamping in the square profile of the workpiece. The outer drawbar actuates the clamping bush (system SG) for clamping in the bore via a draw piece. The stop surfaces in the workpiece are truncated pyramid-shaped. The end stop is designed to float to avoid axial jamming.
Advantages:
- two independently operating clamping points with different clamping systems (diameter and square clamping)- floating end stop for optimum radial clearance
- category:
- Clamping Mandrel
- machining:
- milling, turning
- workpiece:
- rotor
- industry:
- electromobility
- clamping-Ø:
- 61,00 mm / 55,00 mm
- connection spindle side:
- cylinder ≤ 170
- sealing air:
- yes
- fitting position:
- horizontal
- transferable torque:
- 135 Nm
- outer-Ø:
- 190,00 mm
- overall length:
- 400,00 mm
- weight clamping device:
- 39 kg
- weight workpiece:
- 1,9 kg
- material workpiece:
- steel
- category:
- Clamping Mandrel
- machining:
- milling, turning
- workpiece:
- rotor
- industry:
- electromobility
- clamping-Ø:
- 61,00 mm / 55,00 mm
- connection spindle side:
- cylinder ≤ 170
- sealing air:
- yes
- fitting position:
- horizontal
- transferable torque:
- 135 Nm
- outer-Ø:
- 190,00 mm
- overall length:
- 400,00 mm
- weight clamping device:
- 39 kg
- weight workpiece:
- 1,9 kg
- material workpiece:
- steel