ZBGF-H-2xD-IKZ-HE-TiAlN-T3
solid carbide circular drill thread mills
Item number GF733508.0100
Machining of tap hole and internal thread
Product features and benefits:
For materials from 44 HRC.no pre-drilled taphole necessarytool for a specific pitch with corrected thread profilefor several dimensions
International material comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 9.95 mm - 12 mm
- nominal diameter [in]:
- 0.392 " - 0.472 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- circular drill thread mill-H
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HE
- shank standard:
- DIN 6535
- coating:
- TIALN-T3
- shank diameter d₂:
- 10 mm
- OAL l₁:
- 76 mm
- usable length l₃:
- 26 mm
- flutes /number of ridges:
- 4
- length of shank:
- 40 mm
- diameter of milling part:
- 7.75
- cutting material:
- HM
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 9.95 mm - 12 mm
- nominal diameter [in]:
- 0.392 " - 0.472 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- circular drill thread mill-H
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HE
- shank standard:
- DIN 6535
- coating:
- TIALN-T3
- shank diameter d₂:
- 10 mm
- OAL l₁:
- 76 mm
- usable length l₃:
- 26 mm
- flutes /number of ridges:
- 4
- length of shank:
- 40 mm
- diameter of milling part:
- 7.75
- cutting material:
- HM
thread symbol
M
nominal diameter d₁ [mm]
9.95 mm - 12 mm
nominal diameter [in]
0.392 " - 0.472 "
pitch [mm]
1.5 mm
thread orientation
internal
basic version
ZBGF - circular drill thread mill
type
circular drill thread mill-H
coolant supply
IKZ
helix direction
straight
clamping flat
HE
shank standard
DIN 6535
coating
TIALN-T3
shank diameter d₂
10 mm
OAL l₁
76 mm
usable length l₃
26 mm
flutes /number of ridges
4
length of shank
40 mm
diameter of milling part
7.75
cutting material
HM
Cutting value calculator
Calculator result
The cutting data shown are standard values,
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.