Carbide thread milling cutter- | Emuge Franken Website

Machining of internal thread

Product features and benefits:

Short machining time thanks to more flutes
deep threads possible thanks to long thread partsmooth milling thanks to flutes with 15° helix anglepre-drilled tap hole necessaryfor a specific pitchfor several dimensionscutter diam should be smaller 2/3 respect. 3/4 than thread diam.

International material comparison

Technical details

thread symbol:: M, MF
nominal diameter d₁ [mm]:: 30 mm - 999 mm
nominal diameter [in]:: 1.181 " - 39.331 "
pitch [mm]:: 3 mm
thread orientation:: internal
basic version:: GF - thread milling cutter
type:: thread milling cutter-Z-R15
coolant supply:: IKZ
helix direction:: R15
clamping flat:: HA
shank standard:: DIN 6535
coating:: without
shank diameter d₂:: 20 mm
OAL l₁:: 105 mm
length of cutting edge l₂:: 43.313 mm
usable length l₃:: 43.3 mm
flutes /number of ridges:: 6
length of shank:: 50 mm
diameter of milling part:: 19.9
cutting material:: HM

thread symbol

M, MF

nominal diameter d₁ [mm]

30 mm - 999 mm

nominal diameter [in]

1.181 " - 39.331 "

pitch [mm]

3 mm

thread orientation

internal

basic version

GF - thread milling cutter

type

thread milling cutter-Z-R15

coolant supply

IKZ

helix direction

R15

clamping flat

shank standard

DIN 6535

coating

without

shank diameter d₂

20 mm

OAL l₁

105 mm

length of cutting edge l₂

43.313 mm

usable length l₃

43.3 mm

flutes /number of ridges

length of shank

50 mm

diameter of milling part

19.9

cutting material

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600_N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800_N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium cast alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N5.2 Tungsten-copper alloys N5.1 Graphite No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² No results found

Unit	Millimeter Inch

GF-Z-R15-IKZ-HA

Product features and benefits:

Downloads to the product