carbide thread mill TICN IKZ | Emuge Franken Website

Machining of internal or external thread

Product features and benefits:

Smooth milling thanks to flutes with 30° helix angle
pre-drilled taphole respect. pre-machined bolt necessaryfor a specific pitchfor several dimensionsFor internal threads the cutter diam should be smaller 2/3 respect. 3/4 than thread diam.For external threads the cutter diam. should be smaller than the thread diam.

International material comparison

Technical details

thread symbol:: BSF, BSW, G, RP, W
nominal diameter d₁ [mm]:: 30 mm - 999 mm
nominal diameter [in]:: 1.181 " - 39.331 "
nominal size:: 1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 4, 7/8
pitch [mm]:: 2.309 mm
threads per inch:: 11
thread orientation:: internal, external
basic version:: GF - thread milling cutter
type:: thread milling cutter-R30
coolant supply:: IKZ
coating:: TICN
shank diameter d₂:: 20 mm
OAL l₁:: 105 mm
length of cutting edge l₂:: 33.481 mm
usable length l₃:: 33.5 mm
flutes /number of ridges:: 5
length of shank:: 50 mm
diameter of milling part:: 19.9
cutting material:: HM

thread symbol

BSF, BSW, G, RP, W

nominal diameter d₁ [mm]

30 mm - 999 mm

nominal diameter [in]

1.181 " - 39.331 "

nominal size

1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 4, 7/8

pitch [mm]

2.309 mm

threads per inch

thread orientation

internal, external

basic version

GF - thread milling cutter

type

thread milling cutter-R30

coolant supply

IKZ

coating

TICN

shank diameter d₂

20 mm

OAL l₁

105 mm

length of cutting edge l₂

33.481 mm

usable length l₃

33.5 mm

flutes /number of ridges

length of shank

50 mm

diameter of milling part

19.9

cutting material

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600_N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800_N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N1.6 Aluminium cast alloys 12% < Si <= 17% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium cast alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N4.3 Fibre-reinforced synthetics (fibre content <= 30%) N4.4 Fibre-reinforced synthetics (fibre content > 30%) N5.1 Graphite N5.2 Tungsten-copper alloys N5.3 Composite materials No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S2.1 Pure nickel <= 600 N/mm² No results found

Unit	Millimeter Inch

GF-R30-IKZ-HB-TiCN

Product features and benefits:

Downloads to the product