Rekord 2A-STEEL
machine taps
Article number C0101001.4159
-
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anschnittform_C.svg)
Chamfer form C, chamfer length 2-3 threads
HSSE tap for applications in steel materials.
Product features and benefits:
International Material Comparison- thread symbol:
- PG
- nominal diameter d₁ [mm]:
- 37 mm
- nominal size:
- 29
- pitch [mm]:
- 1.588 mm
- pitch [in]:
- 0.062 "
- threads per inch:
- 16
- constructional design:
- DIN 40433
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- STEEL
- Coating:
- without
- shank diameter d₂:
- 28 mm
- OAL l₁:
- 170 mm
- length of cutting edge l₂:
- 30 mm
- square ◘:
- 22 mm
- tap hole diameter:
- 35.6 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- PG
- nominal diameter d₁ [mm]:
- 37 mm
- nominal size:
- 29
- pitch [mm]:
- 1.588 mm
- pitch [in]:
- 0.062 "
- threads per inch:
- 16
- constructional design:
- DIN 40433
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- STEEL
- Coating:
- without
- shank diameter d₂:
- 28 mm
- OAL l₁:
- 170 mm
- length of cutting edge l₂:
- 30 mm
- square ◘:
- 22 mm
- tap hole diameter:
- 35.6 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
thread symbol
PG
nominal diameter d₁ [mm]
37 mm
nominal size
29
pitch [mm]
1.588 mm
pitch [in]
0.062 "
threads per inch
16
constructional design
DIN 40433
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
Geometry
STEEL
Coating
without
shank diameter d₂
28 mm
OAL l₁
170 mm
length of cutting edge l₂
30 mm
square ◘
22 mm
tap hole diameter
35.6 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
