Rekord 2A-HCUT-PM-TICN
machine taps
Article number C010J901.4035
-
Possible thread depthHole type: through holeHole type: blind holeChamfer form C, chamfer length 2-3 threads
HSSE-PM tap for applications in hardened steels.
Product features and benefits:
Specially adapted flute shape, rake angle and clearance angle contribute to long tool life
International Material Comparison- thread symbol:
- G
- nominal diameter d₁ [mm]:
- 9.728 mm
- nominal size:
- 1/8
- pitch [mm]:
- 0.907 mm
- pitch [in]:
- 0.036 "
- threads per inch:
- 28
- constructional design:
- DIN 5156
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- HCUT
- Coating:
- TICN
- shank diameter d₂:
- 7 mm
- OAL l₁:
- 90 mm
- length of cutting edge l₂:
- 10 mm
- square ◘:
- 5.5 mm
- tap hole diameter:
- 8.8 mm
- cutting material:
- HSSE-PM
Technical details
- thread symbol:
- G
- nominal diameter d₁ [mm]:
- 9.728 mm
- nominal size:
- 1/8
- pitch [mm]:
- 0.907 mm
- pitch [in]:
- 0.036 "
- threads per inch:
- 28
- constructional design:
- DIN 5156
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- HCUT
- Coating:
- TICN
- shank diameter d₂:
- 7 mm
- OAL l₁:
- 90 mm
- length of cutting edge l₂:
- 10 mm
- square ◘:
- 5.5 mm
- tap hole diameter:
- 8.8 mm
- cutting material:
- HSSE-PM
thread symbol
G
nominal diameter d₁ [mm]
9.728 mm
nominal size
1/8
pitch [mm]
0.907 mm
pitch [in]
0.036 "
threads per inch
28
constructional design
DIN 5156
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
Geometry
HCUT
Coating
TICN
shank diameter d₂
7 mm
OAL l₁
90 mm
length of cutting edge l₂
10 mm
square ◘
5.5 mm
tap hole diameter
8.8 mm
cutting material
HSSE-PM
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.