Rekord 2A-GG-NT
machine taps
Article number C0102001.0120
-
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anschnittform_C.svg)
Chamfer form C, chamfer length 2-3 threads
HSSE taps for applications in cast iron.
Product features and benefits:
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 20 mm
- pitch [mm]:
- 2.5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- GG
- Coating:
- NT
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 140 mm
- length of cutting edge l₂:
- 32 mm
- square ◘:
- 12 mm
- tap hole diameter:
- 17.5 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 20 mm
- pitch [mm]:
- 2.5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- GG
- Coating:
- NT
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 140 mm
- length of cutting edge l₂:
- 32 mm
- square ◘:
- 12 mm
- tap hole diameter:
- 17.5 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
20 mm
pitch [mm]
2.5 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
Geometry
GG
Coating
NT
shank diameter d₂
16 mm
OAL l₁
140 mm
length of cutting edge l₂
32 mm
square ◘
12 mm
tap hole diameter
17.5 mm
coolant-lubricant
emulsion
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
