Drück 2-STEEL-SN-TIN
machine cold-forming taps
Article number C0921400.0112
-
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anformkegelform_C.svg)
Lead taper form C, lead taper length 2-3 threads
HSSE cold-forming tap for applications in many materials.
Product features and benefits:
Lubrication grooves to avoid cold pressure welding especially recommended for through-hole threads and horizontal machining.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.75 mm
- Constructional design:
- DIN 2174
- thread sense of rotation:
- right hand
- coolant supply:
- without
- lead taper form:
- Form C
- Geometry:
- STEEL
- Coating:
- TIN
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 24 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 11.25 mm
- coolant-lubricant:
- emulsion, thread cutting oil, thread cutting paste
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.75 mm
- Constructional design:
- DIN 2174
- thread sense of rotation:
- right hand
- coolant supply:
- without
- lead taper form:
- Form C
- Geometry:
- STEEL
- Coating:
- TIN
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 24 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 11.25 mm
- coolant-lubricant:
- emulsion, thread cutting oil, thread cutting paste
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
12 mm
pitch [mm]
1.75 mm
Constructional design
DIN 2174
thread sense of rotation
right hand
coolant supply
without
lead taper form
Form C
Geometry
STEEL
Coating
TIN
shank diameter d₂
9 mm
OAL l₁
110 mm
length of cutting edge l₂
24 mm
square ◘
7 mm
tap hole diameter
11.25 mm
coolant-lubricant
emulsion, thread cutting oil, thread cutting paste
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
