ZIRK-GF-15mm-Z1-IKZN
circular thread milling bodies for multi-tooth indexable inserts
Article number GZ301110
Machining of internal and/or external threads.
Product features and benefits:
For multi-tooth exchangeable insert.Cross-dimensional.Pitch-dependent.The diameter of the end mill should be smaller than 2/3 respectively 3/4 of the thread diameter for internal threads.For external threads the diameter of the end mill should be smaller than the thread diameter.
- thread symbol:
- BSF, BSW, G, M, MF, UN, UNC, UNEF, UNF, W
- nominal diameter d₁ [mm]:
- 21.3 mm - 999 mm
- nominal diameter [in]:
- 0.839 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
- pitch [mm]:
- 0.5 mm - 2.5 mm
- pitch [in]:
- 0.02 " - 0.098 "
- threads per inch:
- 11,12,14,16,20
- thread orientation:
- internal, external
- basic version:
- Zirk-GF - circular thread milling bodies
- type:
- milling bodies/exchangable thread inserts 15mm
- coolant supply:
- IKZN
- clamping flat:
- B
- shank standard:
- DIN 1835
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 78 mm
- length of cutting edge l₂:
- 15 mm
- usable length l₃:
- 28.5 mm
- Neck diameter d5:
- 13 mm
- flutes /number of ridges:
- 1
- size of insert:
- MZP 15
- clamping length l₄:
- 48 mm
- diameter of milling part dF:
- 16
Technical details
- thread symbol:
- BSF, BSW, G, M, MF, UN, UNC, UNEF, UNF, W
- nominal diameter d₁ [mm]:
- 21.3 mm - 999 mm
- nominal diameter [in]:
- 0.839 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
- pitch [mm]:
- 0.5 mm - 2.5 mm
- pitch [in]:
- 0.02 " - 0.098 "
- threads per inch:
- 11,12,14,16,20
- thread orientation:
- internal, external
- basic version:
- Zirk-GF - circular thread milling bodies
- type:
- milling bodies/exchangable thread inserts 15mm
- coolant supply:
- IKZN
- clamping flat:
- B
- shank standard:
- DIN 1835
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 78 mm
- length of cutting edge l₂:
- 15 mm
- usable length l₃:
- 28.5 mm
- Neck diameter d5:
- 13 mm
- flutes /number of ridges:
- 1
- size of insert:
- MZP 15
- clamping length l₄:
- 48 mm
- diameter of milling part dF:
- 16
thread symbol
BSF, BSW, G, M, MF, UN, UNC, UNEF, UNF, W
nominal diameter d₁ [mm]
21.3 mm - 999 mm
nominal diameter [in]
0.839 " - 39.331 "
nominal size
1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 4, 7/8
pitch [mm]
0.5 mm - 2.5 mm
pitch [in]
0.02 " - 0.098 "
threads per inch
11,12,14,16,20
thread orientation
internal, external
basic version
Zirk-GF - circular thread milling bodies
type
milling bodies/exchangable thread inserts 15mm
coolant supply
IKZN
clamping flat
B
shank standard
DIN 1835
shank diameter d₂
16 mm
OAL l₁
78 mm
length of cutting edge l₂
15 mm
usable length l₃
28.5 mm
Neck diameter d5
13 mm
flutes /number of ridges
1
size of insert
MZP 15
clamping length l₄
48 mm
diameter of milling part dF
16
_ZIRK-GF-HM-FP-Z1-15mm-unbesch.jpg)
_ZIRK-GF-MZP-15mm-TIALN.jpg)
_Torx-Spannschraube.jpg)
_Torx-Schraubendreher.jpg)