ZBGF-H-2xD-IKZ-HB-TiAlN-T3
solid carbide cicular drill thread mills
Article number GF733208.0112
Machining of tap hole and internal thread.
Product features and benefits:
For workpiece material up to 44 HRCPredrilled tap hole not necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 11.95 mm - 14 mm
- nominal diameter [in]:
- 0.47 " - 0.551 "
- pitch [mm]:
- 1.75 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-HCUT
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- LH
- Coating:
- TIALN-T3
- shank diameter d₂:
- 12 mm
- OAL l₁:
- 86 mm
- length of cutting edge l₂:
- 7 mm
- usable length l₃:
- 30 mm
- flutes /number of ridges:
- 4
- clamping length l₄:
- 45 mm
- diameter of milling part dF:
- 9.2
- cutting material:
- carbide
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 11.95 mm - 14 mm
- nominal diameter [in]:
- 0.47 " - 0.551 "
- pitch [mm]:
- 1.75 mm
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-HCUT
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- LH
- Coating:
- TIALN-T3
- shank diameter d₂:
- 12 mm
- OAL l₁:
- 86 mm
- length of cutting edge l₂:
- 7 mm
- usable length l₃:
- 30 mm
- flutes /number of ridges:
- 4
- clamping length l₄:
- 45 mm
- diameter of milling part dF:
- 9.2
- cutting material:
- carbide
thread symbol
M
nominal diameter d₁ [mm]
11.95 mm - 14 mm
nominal diameter [in]
0.47 " - 0.551 "
pitch [mm]
1.75 mm
thread orientation
internal
basic version
ZBGF - circular drill thread mill
type
ZBGF-HCUT
coolant supply
IKZ
helix direction
straight
clamping flat
HB
shank standard
DIN 6535
direction of tool rotation
LH
Coating
TIALN-T3
shank diameter d₂
12 mm
OAL l₁
86 mm
length of cutting edge l₂
7 mm
usable length l₃
30 mm
flutes /number of ridges
4
clamping length l₄
45 mm
diameter of milling part dF
9.2
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.