GF-Z-R15-IKZ-HA-TiCN

solid carbide thread milling cutters for internal threads

Article number GF165976.9514

Machining of internal threads.

Product features and benefits:

Short machining time due to more flutes.
Deep thread possible thanks to long thread part.
Smooth milling operation thanks to flutes with 15° helix angle.
Predrilled tap hole necessary.
Pitch-dependent.
Cross-dimensional.
For internal threads the diameter of the end mill should be smaller than 2/3 or 3/4 of the thread diameter.

International Material Comparison
thread symbol:
M, MF
nominal diameter d₁ [mm]:
16 mm - 999 mm
nominal diameter [in]:
0.63 " - 39.331 "
pitch [mm]:
1.5 mm
thread orientation:
internal
basic version:
GF - thread milling cutter
type:
GF-Z-R15
coolant supply:
IKZ
helix direction:
R15
clamping flat:
HA
shank standard:
DIN 6535
direction of tool rotation:
RH
Coating:
TICN
shank diameter d₂:
12 mm
OAL l₁:
80 mm
length of cutting edge l₂:
26.156 mm
flutes /number of ridges:
6
clamping length l₄:
45 mm
diameter of milling part dF:
11.9
cutting material:
carbide
Technical details
thread symbol:
M, MF
nominal diameter d₁ [mm]:
16 mm - 999 mm
nominal diameter [in]:
0.63 " - 39.331 "
pitch [mm]:
1.5 mm
thread orientation:
internal
basic version:
GF - thread milling cutter
type:
GF-Z-R15
coolant supply:
IKZ
helix direction:
R15
clamping flat:
HA
shank standard:
DIN 6535
direction of tool rotation:
RH
Coating:
TICN
shank diameter d₂:
12 mm
OAL l₁:
80 mm
length of cutting edge l₂:
26.156 mm
flutes /number of ridges:
6
clamping length l₄:
45 mm
diameter of milling part dF:
11.9
cutting material:
carbide
thread symbol
M, MF
nominal diameter d₁ [mm]
16 mm - 999 mm
nominal diameter [in]
0.63 " - 39.331 "
pitch [mm]
1.5 mm
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-Z-R15
coolant supply
IKZ
helix direction
R15
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TICN
shank diameter d₂
12 mm
OAL l₁
80 mm
length of cutting edge l₂
26.156 mm
flutes /number of ridges
6
clamping length l₄
45 mm
diameter of milling part dF
11.9
cutting material
carbide
Cutting Values