carbide thread milling cutter

Technical details

thread symbol:: BSF, BSW, G, RP, W
nominal diameter d₁ [mm]:: 20.9 mm - 999 mm
nominal diameter [in]:: 0.823 " - 39.331 "
nominal size:: 1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 1/2, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 3/4, 4, 5/8, 7/8
pitch [mm]:: 1.814 mm
pitch [in]:: 0.071 "
threads per inch:: 14
thread orientation:: internal, external
basic version:: GF - thread milling cutter
type:: GF
coolant supply:: IKZ
helix direction:: straight
clamping flat:: HA
shank standard:: DIN 6535
direction of tool rotation:: RH
Coating:: TICN
shank diameter d₂:: 16 mm
OAL l₁:: 90 mm
length of cutting edge l₂:: 26.303 mm
flutes /number of ridges:: 5
clamping length l₄:: 48 mm
diameter of milling part dF:: 15.9
cutting material:: carbide

thread symbol

BSF, BSW, G, RP, W

nominal diameter d₁ [mm]

20.9 mm - 999 mm

nominal diameter [in]

0.823 " - 39.331 "

nominal size

1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 1/2, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 3/4, 4, 5/8, 7/8

pitch [mm]

1.814 mm

pitch [in]

0.071 "

threads per inch

thread orientation

internal, external

basic version

GF - thread milling cutter

type

coolant supply

IKZ

helix direction

straight

clamping flat

shank standard

DIN 6535

direction of tool rotation

Coating

TICN

shank diameter d₂

16 mm

OAL l₁

90 mm

length of cutting edge l₂

26.303 mm

flutes /number of ridges

clamping length l₄

48 mm

diameter of milling part dF

15.9

cutting material

carbide

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N1.6 Aluminium cast alloys 12% < Si <= 17% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N2.8 Special copper alloys <= 1400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium wrought alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N4.3 Fibre-reinforced synthetics (fibre content <= 30%) N4.4 Fibre-reinforced synthetics (fibre content > 30%) N5.1 Graphite N5.2 Tungsten-copper alloys N5.3 Composite materials No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found Hard materials Search for value H1.1 High strength steels, hardened steels, hard castings 44 – 50 HRC H1.2 High strength steels, hardened steels, hard castings 50 – 55 HRC No results found

Unit	Millimeter Inch

GF-IKZ-HA-TiCN

Product features and benefits:

Downloads to the product