GF-R30-lg-IKZ-HA-TiCN
solid carbide thread milling cutters for internal threads
Article number GF162916.9580




Machining of internal thread
Product features and benefits:
Deep threads possible thanks to long milling partsmooth milling thanks to flutes with 30° helix anglepre-drilled taphole necessaryfor a specific pitchfor several dimensionscutter diam should be smaller 2/3 respect. 3/4 than thread diam.
International material comparison- thread symbol:
- UN, UNC, UNEF, UNF, UNS
- nominal diameter d₁ [mm]:
- 12.7 mm - 999 mm
- nominal diameter [in]:
- 0.5 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 1/2, 11/16, 13/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 3/4, 4, 5/8, 7/8, 9/16
- pitch [mm]:
- 1.27 mm
- pitch [in]:
- 0.05 "
- threads per inch:
- 20
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-R30-long
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- coating:
- TICN
- shank diameter d₂:
- 10 mm
- OAL l₁:
- 80 mm
- length of cutting edge l₂:
- 20.876 mm
- usable length l₃:
- 20.9 mm
- flutes /number of ridges:
- 4
- length of shank:
- 40 mm
- diameter of milling part dF:
- 9.9
- cutting material:
- HM
Technical details
- thread symbol:
- UN, UNC, UNEF, UNF, UNS
- nominal diameter d₁ [mm]:
- 12.7 mm - 999 mm
- nominal diameter [in]:
- 0.5 " - 39.331 "
- nominal size:
- 1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 1/2, 11/16, 13/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 3/4, 4, 5/8, 7/8, 9/16
- pitch [mm]:
- 1.27 mm
- pitch [in]:
- 0.05 "
- threads per inch:
- 20
- thread orientation:
- internal
- basic version:
- GF - thread milling cutter
- type:
- GF-R30-long
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- coating:
- TICN
- shank diameter d₂:
- 10 mm
- OAL l₁:
- 80 mm
- length of cutting edge l₂:
- 20.876 mm
- usable length l₃:
- 20.9 mm
- flutes /number of ridges:
- 4
- length of shank:
- 40 mm
- diameter of milling part dF:
- 9.9
- cutting material:
- HM
thread symbol
UN, UNC, UNEF, UNF, UNS
nominal diameter d₁ [mm]
12.7 mm - 999 mm
nominal diameter [in]
0.5 " - 39.331 "
nominal size
1, 1 1/16, 1 1/2, 1 1/4, 1 1/8, 1 11/16, 1 13/16, 1 15/16, 1 3/16, 1 3/4, 1 3/8, 1 5/16, 1 5/8, 1 7/16, 1 7/8, 1 9/16, 1/2, 11/16, 13/16, 15/16, 2, 2 1/2, 2 1/4, 2 1/8, 2 3/4, 2 3/8, 2 5/8, 2 7/8, 3, 3 1/2, 3 1/4, 3 1/8, 3 3/4, 3 3/8, 3 5/8, 3 7/8, 3/4, 4, 5/8, 7/8, 9/16
pitch [mm]
1.27 mm
pitch [in]
0.05 "
threads per inch
20
thread orientation
internal
basic version
GF - thread milling cutter
type
GF-R30-long
coolant supply
IKZ
helix direction
R30
clamping flat
HA
shank standard
DIN 6535
coating
TICN
shank diameter d₂
10 mm
OAL l₁
80 mm
length of cutting edge l₂
20.876 mm
usable length l₃
20.9 mm
flutes /number of ridges
4
length of shank
40 mm
diameter of milling part dF
9.9
cutting material
HM
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active