carbide thread milling cutter,

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium wrought alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N5.1 Graphite N5.2 Tungsten-copper alloys No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² No results found

Unit	Millimeter Inch

Steel materials

P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm²
P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm²
P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm²
P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm²
P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm²
No results found

Cast materials

K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm²
K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm²
K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm²
K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm²
K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm²
K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm²
K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm²
K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm²
No results found

Non ferrous materials

Special materials

S1.1 Pure titanium <= 450 N/mm²
S1.2 Titanium alloys <= 900 N/mm²
S1.3 Titanium alloys <= 1250 N/mm²
No results found