GF-Z-R15-IKZ-HB-TiCN

solid carbide thread milling cutters for internal and external threads

Item number GF165376.9548

Machining of internal or external thread

Product features and benefits:

Short machining time thanks to more flutes
deep threads possible thanks to long thread partsmooth milling thanks to flutes with 15° helix anglepre-drilled tap hole respect. premachined bolt necessaryfor a specific pitchfor several dimensionsFor internal threads the cutter diam should be smaller 2/3 respect. 3/4 than thread diam.For external threads the cutter diam. should be smaller than the thread diam.

International material comparison

Details

thread symbol:: BSF, BSW, G, RP, W
nominal diameter d₁ [mm]:: 20.9 mm - 999 mm
nominal diameter [in]:: 0.823 " - 39.331 "
nominal size:: 1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 1/2, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 3/4, 4, 5/8, 7/8
pitch [mm]:: 1.814 mm
threads per inch:: 14
thread orientation:: internal, external
basic version:: GF - thread milling cutter
type:: thread milling cutter-Z-R15
coolant supply:: IKZ
helix direction:: R15
clamping flat:: HB
shank standard:: DIN 6535
coating:: TICN
shank diameter d₂:: 12 mm
OAL l₁:: 80 mm
length of cutting edge l₂:: 26.303 mm
usable length l₃:: 26.3 mm
flutes /number of ridges:: 5
length of shank:: 45 mm
diameter of milling part:: 11.9
cutting material:: HM

Technical details

thread symbol:: BSF, BSW, G, RP, W
nominal diameter d₁ [mm]:: 20.9 mm - 999 mm
nominal diameter [in]:: 0.823 " - 39.331 "
nominal size:: 1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 1/2, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 3/4, 4, 5/8, 7/8
pitch [mm]:: 1.814 mm
threads per inch:: 14
thread orientation:: internal, external
basic version:: GF - thread milling cutter
type:: thread milling cutter-Z-R15
coolant supply:: IKZ
helix direction:: R15
clamping flat:: HB
shank standard:: DIN 6535
coating:: TICN
shank diameter d₂:: 12 mm
OAL l₁:: 80 mm
length of cutting edge l₂:: 26.303 mm
usable length l₃:: 26.3 mm
flutes /number of ridges:: 5
length of shank:: 45 mm
diameter of milling part:: 11.9
cutting material:: HM

thread symbol

BSF, BSW, G, RP, W

nominal diameter d₁ [mm]

20.9 mm - 999 mm

nominal diameter [in]

0.823 " - 39.331 "

nominal size

1, 1 1/2, 1 1/4, 1 1/8, 1 3/4, 1 3/8, 1 5/8, 1 7/8, 1/2, 2, 2 1/2, 2 1/4, 2 3/4, 3, 3 1/2, 3 1/4, 3 3/4, 3/4, 4, 5/8, 7/8

pitch [mm]

1.814 mm

threads per inch

thread orientation

internal, external

basic version

GF - thread milling cutter

type

thread milling cutter-Z-R15

coolant supply

IKZ

helix direction

R15

clamping flat

shank standard

DIN 6535

coating

TICN

shank diameter d₂

12 mm

OAL l₁

80 mm

length of cutting edge l₂

26.303 mm

usable length l₃

26.3 mm

flutes /number of ridges

length of shank

45 mm

diameter of milling part

11.9

cutting material

Cutting parameters calculator

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N1.6 Aluminium cast alloys 12% < Si <= 17% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N2.8 Special copper alloys <= 1400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium cast alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N4.3 Fibre-reinforced synthetics (fibre content <= 30%) N4.4 Fibre-reinforced synthetics (fibre content > 30%) N5.1 Graphite N5.2 Tungsten-copper alloys N5.3 Composite materials No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found Hard materials Search for value H1.1 High strength steels, hardened steels, hard castings 44 – 50 HRC H1.2 High strength steels, hardened steels, hard castings 50 – 55 HRC No results found

Unit	Millimeter Inch

Downloads to the product

2D-tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
3D-tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
2D-tool drawing as per DIN SPEC 69874 (DXF) Please log in for the file download. Please also note that your registration should be active
Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active

Download all files