Rekord 2A-STEEL
machine taps
Article number C0101001.5908
-
Possible thread depth
Hole type: through hole
Hole type: blind hole
Chamfer form C, chamfer length 2-3 threads
HSSE tap for applications in steel materials.
International comparison of workpiece materials- thread symbol:
- NPSF
- nominal diameter d₁ [mm]:
- 20.819 mm
- nominal size:
- 1/2
- pitch [mm]:
- 1.814 mm
- pitch [in]:
- 0.071 "
- threads per inch:
- 14
- constructional design:
- similar DIN 5156
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- STEEL
- coating:
- without
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 125 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 12 mm
- tap hole diameter:
- 18.2 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- NPSF
- nominal diameter d₁ [mm]:
- 20.819 mm
- nominal size:
- 1/2
- pitch [mm]:
- 1.814 mm
- pitch [in]:
- 0.071 "
- threads per inch:
- 14
- constructional design:
- similar DIN 5156
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- STEEL
- coating:
- without
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 125 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 12 mm
- tap hole diameter:
- 18.2 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
thread symbol
NPSF
nominal diameter d₁ [mm]
20.819 mm
nominal size
1/2
pitch [mm]
1.814 mm
pitch [in]
0.071 "
threads per inch
14
constructional design
similar DIN 5156
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
STEEL
coating
without
shank diameter d₂
16 mm
OAL l₁
125 mm
length of cutting edge l₂
25 mm
square ◘
12 mm
tap hole diameter
18.2 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active