Rekord 2A-STEEL
machine taps
Article number C0101001.0152
-
_Web_Gewindetiefe_2xD.svg)
Possible thread depth
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anschnittform_C.svg)
Chamfer form C, chamfer length 2-3 threads
HSSE tap for applications in steel materials.
International comparison of workpiece materials- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 52 mm
- pitch [mm]:
- 5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- STEEL
- coating:
- without
- shank diameter d₂:
- 40 mm
- OAL l₁:
- 250 mm
- length of cutting edge l₂:
- 65 mm
- square ◘:
- 32 mm
- tap hole diameter:
- 47 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 52 mm
- pitch [mm]:
- 5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- STEEL
- coating:
- without
- shank diameter d₂:
- 40 mm
- OAL l₁:
- 250 mm
- length of cutting edge l₂:
- 65 mm
- square ◘:
- 32 mm
- tap hole diameter:
- 47 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
52 mm
pitch [mm]
5 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
STEEL
coating
without
shank diameter d₂
40 mm
OAL l₁
250 mm
length of cutting edge l₂
65 mm
square ◘
32 mm
tap hole diameter
47 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 2D-Zeichnung nach ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
