Rekord 2A-STEEL
machine taps
Article number C0101001.4093
HSSE tap for applications in steel materials.
International comparison of workpiece materials- thread symbol:
- RP
- nominal diameter d₁ [mm]:
- 13.157 mm
- nominal size:
- 1/4
- pitch [mm]:
- 1.337 mm
- pitch [in]:
- 0.053 "
- threads per inch:
- 19
- constructional design:
- similar DIN 5157
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- STEEL
- coating:
- without
- shank diameter d₂:
- 11 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 22 mm
- square ◘:
- 9 mm
- tap hole diameter:
- 11.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
Technical details
- thread symbol:
- RP
- nominal diameter d₁ [mm]:
- 13.157 mm
- nominal size:
- 1/4
- pitch [mm]:
- 1.337 mm
- pitch [in]:
- 0.053 "
- threads per inch:
- 19
- constructional design:
- similar DIN 5157
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- STEEL
- coating:
- without
- shank diameter d₂:
- 11 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 22 mm
- square ◘:
- 9 mm
- tap hole diameter:
- 11.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE
thread symbol
RP
nominal diameter d₁ [mm]
13.157 mm
nominal size
1/4
pitch [mm]
1.337 mm
pitch [in]
0.053 "
threads per inch
19
constructional design
similar DIN 5157
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
STEEL
coating
without
shank diameter d₂
11 mm
OAL l₁
100 mm
length of cutting edge l₂
22 mm
square ◘
9 mm
tap hole diameter
11.5 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
