Rekord 2A-HCUT-PM-TICN
machine taps
Article number C010J901.0120
HSSE-PM tap for hardened steel applications
Product features and benefits:
Specially adapted flute shape, rake angle and relief angle for long tool life.
International comparison of workpiece materials- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 20 mm
- pitch [mm]:
- 2.5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- HCUT
- coating:
- TICN
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 140 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 12 mm
- tap hole diameter:
- 17.7 mm
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- cutting material:
- HSSE-PM
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 20 mm
- pitch [mm]:
- 2.5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- HCUT
- coating:
- TICN
- shank diameter d₂:
- 16 mm
- OAL l₁:
- 140 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 12 mm
- tap hole diameter:
- 17.7 mm
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- cutting material:
- HSSE-PM
thread symbol
M
nominal diameter d₁ [mm]
20 mm
pitch [mm]
2.5 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
HCUT
coating
TICN
shank diameter d₂
16 mm
OAL l₁
140 mm
length of cutting edge l₂
25 mm
square ◘
12 mm
tap hole diameter
17.7 mm
coolant-lubricant
thread cutting oil, thread cutting paste
cutting material
HSSE-PM
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active