Rekord 2A-H-TICN
machine taps
Article number C0109101.0124
-
_Web_Gewindetiefe_2xD.svg)
Possible thread depth
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anschnittform_C.svg)
Chamfer form C, chamfer length 2-3 threads
HSSE tap for applications in high-strength workpiece materials.
Product features and benefits:
TICN coating for less wear and longer tool life.
International comparison of workpiece materials- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 24 mm
- pitch [mm]:
- 3 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- H
- coating:
- TICN
- shank diameter d₂:
- 18 mm
- OAL l₁:
- 160 mm
- length of cutting edge l₂:
- 34 mm
- square ◘:
- 14.5 mm
- tap hole diameter:
- 21 mm
- coolant-lubricant:
- emulsion, thread cutting oil, thread cutting paste
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 24 mm
- pitch [mm]:
- 3 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- H
- coating:
- TICN
- shank diameter d₂:
- 18 mm
- OAL l₁:
- 160 mm
- length of cutting edge l₂:
- 34 mm
- square ◘:
- 14.5 mm
- tap hole diameter:
- 21 mm
- coolant-lubricant:
- emulsion, thread cutting oil, thread cutting paste
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
24 mm
pitch [mm]
3 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
H
coating
TICN
shank diameter d₂
18 mm
OAL l₁
160 mm
length of cutting edge l₂
34 mm
square ◘
14.5 mm
tap hole diameter
21 mm
coolant-lubricant
emulsion, thread cutting oil, thread cutting paste
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
