Rekord 2A-H-NT
machine taps
Article number C0100501.5013
-
Possible thread depth
Hole type: through hole
Hole type: blind hole
Chamfer form C, chamfer length 2-3 threads




HSSE tap for applications in high-strength workpiece materials.
International comparison of workpiece materials- thread symbol:
- UNC
- nominal diameter d₁ [mm]:
- 12.7 mm
- nominal diameter [in]:
- 0.5 "
- nominal size:
- 1/2
- pitch [mm]:
- 1.954 mm
- pitch [in]:
- 0.077 "
- threads per inch:
- 13
- constructional design:
- similar DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rekord A - straight flutes
- geometrie:
- H
- coating:
- NT
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.8 mm
- coolant-lubricant:
- emulsion, thread cutting oil, thread cutting paste
- cutting material:
- HSSE
Technical details
- thread symbol:
- UNC
- nominal diameter d₁ [mm]:
- 12.7 mm
- nominal diameter [in]:
- 0.5 "
- nominal size:
- 1/2
- pitch [mm]:
- 1.954 mm
- pitch [in]:
- 0.077 "
- threads per inch:
- 13
- constructional design:
- similar DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rekord A - straight flutes
- geometrie:
- H
- coating:
- NT
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.8 mm
- coolant-lubricant:
- emulsion, thread cutting oil, thread cutting paste
- cutting material:
- HSSE
thread symbol
UNC
nominal diameter d₁ [mm]
12.7 mm
nominal diameter [in]
0.5 "
nominal size
1/2
pitch [mm]
1.954 mm
pitch [in]
0.077 "
threads per inch
13
constructional design
similar DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rekord A - straight flutes
geometrie
H
coating
NT
shank diameter d₂
9 mm
OAL l₁
110 mm
length of cutting edge l₂
25 mm
square ◘
7 mm
tap hole diameter
10.8 mm
coolant-lubricant
emulsion, thread cutting oil, thread cutting paste
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active