Rekord 2A-GJV/E-IKZ-PM-TICN
machine taps
Article number C196R501.0112
-
Hole type: through holeHole type: blind holeChamfer form E, chamfer length 1-1.5 threads
HSSE-PM tap for applications in cast iron with vermicular graphite (CGI).
Product features and benefits:
More flutes and adapted geometry for longer tool life in these abrasive materials.Increased tolerance for longer tool life in abrasive or jamming materials.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.75 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- chamfer form:
- Form E
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- GJV
- Coating:
- TICN
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 24 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.2 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE-PM
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.75 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- chamfer form:
- Form E
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- GJV
- Coating:
- TICN
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 24 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.2 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE-PM
thread symbol
M
nominal diameter d₁ [mm]
12 mm
pitch [mm]
1.75 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
IKZ
chamfer form
Form E
flute characteristic
Rek. a- straight flutes
Geometry
GJV
Coating
TICN
shank diameter d₂
9 mm
OAL l₁
110 mm
length of cutting edge l₂
24 mm
square ◘
7 mm
tap hole diameter
10.2 mm
coolant-lubricant
emulsion
cutting material
HSSE-PM
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.