Rekord 2A-GG-TICN
machine taps
Article number C0109201.0112
HSSE tap for grey cast iron applications.
Product features and benefits:
TICN coating for less wear and longer tool life.
International comparison of workpiece materials- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.75 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- GG
- coating:
- TICN
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 24 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.2 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.75 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- GG
- coating:
- TICN
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 110 mm
- length of cutting edge l₂:
- 24 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.2 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
12 mm
pitch [mm]
1.75 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
GG
coating
TICN
shank diameter d₂
9 mm
OAL l₁
110 mm
length of cutting edge l₂
24 mm
square ◘
7 mm
tap hole diameter
10.2 mm
coolant-lubricant
emulsion
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active