Rekord 2A-GG-NT
machine taps
Item number C0102001.0127
-
Possible thread depth
Hole type: through hole
Hole type: blind hole
Chamfer form C, chamfer length 2-3 threads
HSSE tap for grey cast iron applications.
International comparison of workpiece materials- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 27 mm
- pitch [mm]:
- 3 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rekord A - straight flutes
- geometrie:
- GG
- coating:
- NT
- shank diameter d₂:
- 20 mm
- OAL l₁:
- 160 mm
- length of cutting edge l₂:
- 36 mm
- square ◘:
- 16 mm
- tap hole diameter:
- 24 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 27 mm
- pitch [mm]:
- 3 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rekord A - straight flutes
- geometrie:
- GG
- coating:
- NT
- shank diameter d₂:
- 20 mm
- OAL l₁:
- 160 mm
- length of cutting edge l₂:
- 36 mm
- square ◘:
- 16 mm
- tap hole diameter:
- 24 mm
- coolant-lubricant:
- emulsion
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
27 mm
pitch [mm]
3 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rekord A - straight flutes
geometrie
GG
coating
NT
shank diameter d₂
20 mm
OAL l₁
160 mm
length of cutting edge l₂
36 mm
square ◘
16 mm
tap hole diameter
24 mm
coolant-lubricant
emulsion
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are standard values,
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D-tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 3D-tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D-tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
