KHM-Rekord 2A-H-IKZ
machine taps
Article number C1950901.0303
-
_Web_Gewindetiefe_2xD.svg)
Possible thread depth
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anschnittform_C.svg)
Chamfer form C, chamfer length 2-3 threads
Carbide tap for applications in high-strength workpiece materials.
International comparison of workpiece materials- thread symbol:
- MF
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.5 mm
- constructional design:
- DIN 374
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- H
- coating:
- without
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 15 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- carbide
Technical details
- thread symbol:
- MF
- nominal diameter d₁ [mm]:
- 12 mm
- pitch [mm]:
- 1.5 mm
- constructional design:
- DIN 374
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- geometry:
- H
- coating:
- without
- shank diameter d₂:
- 9 mm
- OAL l₁:
- 100 mm
- length of cutting edge l₂:
- 15 mm
- square ◘:
- 7 mm
- tap hole diameter:
- 10.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- carbide
thread symbol
MF
nominal diameter d₁ [mm]
12 mm
pitch [mm]
1.5 mm
constructional design
DIN 374
thread sense of rotation
right hand
coolant supply
IKZ
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
geometry
H
coating
without
shank diameter d₂
9 mm
OAL l₁
100 mm
length of cutting edge l₂
15 mm
square ◘
7 mm
tap hole diameter
10.5 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
