KHM-Rekord 2A-H-IKZ
machine taps
Article number C1950901.0118
-
Hole type: through hole
Hole type: blind hole
Chamfer form C, chamfer length 2-3 threads
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 18 mm
- pitch [mm]:
- 2.5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- H
- Coating:
- without
- shank diameter d₂:
- 14 mm
- OAL l₁:
- 125 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 11 mm
- tap hole diameter:
- 15.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- carbide
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 18 mm
- pitch [mm]:
- 2.5 mm
- constructional design:
- DIN 376
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- H
- Coating:
- without
- shank diameter d₂:
- 14 mm
- OAL l₁:
- 125 mm
- length of cutting edge l₂:
- 25 mm
- square ◘:
- 11 mm
- tap hole diameter:
- 15.5 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- carbide
thread symbol
M
nominal diameter d₁ [mm]
18 mm
pitch [mm]
2.5 mm
constructional design
DIN 376
thread sense of rotation
right hand
coolant supply
IKZ
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
Geometry
H
Coating
without
shank diameter d₂
14 mm
OAL l₁
125 mm
length of cutting edge l₂
25 mm
square ◘
11 mm
tap hole diameter
15.5 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active