Enorm 1-Z-X-PM-GLT-1

HSSE-PM tap for universal application in almost all materials.

Product features and benefits:

Designed for use in CNC-controlled machines.
Increased tolerance for longer tool life in abrasive or jamming materials.
Tapered lead thread avoids tooth chipping in case of jammed chips.
Longer flutes enable better chip removal for deep threads.

International Material Comparison

Technical details

thread symbol:: M
nominal diameter d₁ [mm]:: 8 mm
pitch [mm]:: 1.25 mm
constructional design:: DIN 371
thread sense of rotation:: right hand
coolant supply:: without
chamfer form:: Form C
flute characteristic:: Enorm - right-hand spiral flutes > R25
Geometry:: Z
Coating:: GLT-1
shank diameter d₂:: 8 mm
OAL l₁:: 90 mm
length of cutting edge l₂:: 14 mm
usable length l₃:: 35 mm
square ◘:: 6.2 mm
tap hole diameter:: 6.8 mm
cutting material:: HSSE-PM

thread symbol

nominal diameter d₁ [mm]

8 mm

pitch [mm]

1.25 mm

constructional design

DIN 371

thread sense of rotation

right hand

coolant supply

without

chamfer form

Form C

flute characteristic

Enorm - right-hand spiral flutes > R25

Geometry

Coating

GLT-1

shank diameter d₂

8 mm

OAL l₁

90 mm

length of cutting edge l₂

14 mm

usable length l₃

35 mm

square ◘

6.2 mm

tap hole diameter

6.8 mm

cutting material

HSSE-PM

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² No results found Non ferrous materials Search for value N1.4 Aluminium cast alloys Si <= 7% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² No results found exception materials Search for value X1.10 Strenx 900 X1.30 Toolox 33 X1.40 Armox 370T CL2 X1.41 Armox 370H No results found

Unit	Millimeter Inch

Product features and benefits:

Accessories

Cutting oil-#1+STEEL

Cutting oil-#3+EMULSION

Cutting oil-#4+NON FERROUS

Cutting paste-#6+PASTE