WM-sets-4S(Nr.1"Z",Nr.1,Nr.2,F)
tool maker set
-
Possible thread depth
Hole type: through hole
Hole type: blind hole
Chamfer form C, chamfer length 2-3 threads
HSSE tap set, four-piece, for applications in (stainless) steel materials and nickel alloys.
Product features and benefits:
For tapping by hand, can also be used mechanically.With taper tap with pilot, taper tap, second tap and finishing tap.Taper tap with pilot no. 1 "Z" facilitates right-angled manual cutting.
International comparison of workpiece materials- coolant supply:
- without
- chamfer form:
- Form C
- geometrie:
- WM
- coating:
- without
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- cutting material:
- HSSE
Technical details
- coolant supply:
- without
- chamfer form:
- Form C
- geometrie:
- WM
- coating:
- without
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- cutting material:
- HSSE
coolant supply
without
chamfer form
Form C
geometrie
WM
coating
without
coolant-lubricant
thread cutting oil, thread cutting paste
cutting material
HSSE
