WM-Satz-F-TIN | EMUGE-FRANKEN

HSSE tap for universal applications in stainless steel materials and Nickel alloys.

Product features and benefits:

For manual tapping, but can also be used with a machine.
Finishing tap, also included in multi-part tap sets (tool maker sets)
TIN coating for improved thread surfaces and longer tool life.

International Material Comparison

Technical details

thread symbol:: M
nominal diameter d₁ [mm]:: 10 mm
pitch [mm]:: 1.5 mm
constructional design:: DIN 352
thread sense of rotation:: right hand
coolant supply:: without
chamfer form:: Form C
flute characteristic:: Rek. a- straight flutes
Geometry:: WM
Coating:: TIN
shank diameter d₂:: 7 mm
OAL l₁:: 70 mm
length of cutting edge l₂:: 22 mm
square ◘:: 5.5 mm
tap hole diameter:: 8.5 mm
coolant-lubricant:: thread cutting oil, thread cutting paste
cutting material:: HSSE

thread symbol

nominal diameter d₁ [mm]

10 mm

pitch [mm]

1.5 mm

constructional design

DIN 352

thread sense of rotation

right hand

coolant supply

without

chamfer form

Form C

flute characteristic

Rek. a- straight flutes

Geometry

Coating

TIN

shank diameter d₂

7 mm

OAL l₁

70 mm

length of cutting edge l₂

22 mm

square ◘

5.5 mm

tap hole diameter

8.5 mm

coolant-lubricant

thread cutting oil, thread cutting paste

cutting material

HSSE

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.1 Aluminium wrought alloys <= 200 N/mm² N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N1.5 Aluminium cast alloys 7% < Si <= 12% N1.6 Aluminium cast alloys 12% < Si <= 17% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² No results found Special materials Search for value S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found

Unit	Millimeter Inch

WM-set-F-TIN

Product features and benefits:

Accessories

Cutting oil-#1+STEEL

Cutting oil-#3+EMULSION

Cutting oil-#4+NON FERROUS

Cutting oil-#5+HIGH ALLOY

Cutting paste-#6+PASTE

tap wrenches for heavy use

tap wrenches for normal use