InnoForm 2-H-SN-IKZ-PM-TIN-T26
machine cold-forming taps
Article number C523W700.0136
-
_Web_Lochform_DULO_Facettierung.svg)
Hole type: through hole
_Web_Lochform_SALO_Facettierung.svg)
Hole type: blind hole
_Web_Anformkegelform_C.svg)
Lead taper form C, lead taper length 2-3 threads
HSSE-PM cold-forming tap for applications in high-strength materials.
Product features and benefits:
Lubrication grooves to avoid cold pressure welding especially recommended for through-hole threads and horizontal machining.Short threaded part and special polygon shape for reduced torque.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 36 mm
- pitch [mm]:
- 4 mm
- Constructional design:
- DIN 2174
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- lead taper form:
- Form C
- Geometry:
- H
- Coating:
- TIN-T26
- shank diameter d₂:
- 28 mm
- OAL l₁:
- 200 mm
- length of cutting edge l₂:
- 40 mm
- square ◘:
- 22 mm
- tap hole diameter:
- 34.15 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE-PM
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 36 mm
- pitch [mm]:
- 4 mm
- Constructional design:
- DIN 2174
- thread sense of rotation:
- right hand
- coolant supply:
- IKZ
- lead taper form:
- Form C
- Geometry:
- H
- Coating:
- TIN-T26
- shank diameter d₂:
- 28 mm
- OAL l₁:
- 200 mm
- length of cutting edge l₂:
- 40 mm
- square ◘:
- 22 mm
- tap hole diameter:
- 34.15 mm
- coolant-lubricant:
- emulsion, thread cutting oil
- cutting material:
- HSSE-PM
thread symbol
M
nominal diameter d₁ [mm]
36 mm
pitch [mm]
4 mm
Constructional design
DIN 2174
thread sense of rotation
right hand
coolant supply
IKZ
lead taper form
Form C
Geometry
H
Coating
TIN-T26
shank diameter d₂
28 mm
OAL l₁
200 mm
length of cutting edge l₂
40 mm
square ◘
22 mm
tap hole diameter
34.15 mm
coolant-lubricant
emulsion, thread cutting oil
cutting material
HSSE-PM
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
