Thread Technology - Accessories for tap holders and tapping attachments
- designation:
- collet
- type:
- ER GB (DIN)
- designation:
- sealing disk
- type:
- DS ER
- designation:
- coolant disc
- type:
- KS ER
- designation:
- adaptor shank
- type:
- KSN
- designation:
- collet
- type:
- ET1 (DIN)
- designation:
- collet
- type:
- PGR GB (DIN)
- designation:
- collet
- type:
- ER
- designation:
- torque wrench
- type:
- DEU/TORCO-FIX
- designation:
- open-end wrench
- type:
- DEU/TORCO-FIX
- designation:
- socket wrench
- type:
- DEU/TORCO-FIX
_Spannzange_ER-GB.jpg)
Collet ER-GB with square seat for use in collet holders and inserts.
_Dichtscheiben_DS_ER.jpg)
Gaskets for clamping nuts Hi-Q/ERC, Hi-Q/ERBC, Hi-Q/ERMC.
_Kuehlscheibe_KS_ER.jpg)
Cooling discs for clamping nuts Hi-Q/ERC, ERBC, ERMC for internal coolant supply along the tool shank.
_Adaptionsschaft_HSK-A-DIN_1835_B.jpg)
Adaptation shank for all seats/equipment with straight shank according to DIN 1835 B+E.
_Spannzange_PCM_ET1.jpg)
Collet PCM ET1 with square seat and length compensation on tension for rigid collet holders, e.g., KSN/Synchro.
_Spannzange_PGR-GB.jpg)
Collet for clamping system PGR/powRgrip®.
_Spannzange_ER.jpg)
Collet ER for use in collet holders and inserts.
Torque wrench, various models.
_Aufsteckschluessel_A-SW.jpg)
Socket wrench for tightening the hexagonal clamping caps of special shank extensions with ICS.
_Aufsteckschluessel_A-E.jpg)
Socket wrench for torque wrench TORCO-FIX