Screw-In End Mill for Rhombic indexable Inserts
9181
Article number 9181.160253 | EAN 4037753441534
-
Unit of measurement: metricRecommended feed directions of the respective cuttersRecommended ramping angleHolders for screw-in end mills
Screw-in milling cutter body 45° for roughing and finishing applications with rhombic indexable inserts (IC 4.6).
Product features and benefits:
Suitable for chamfering due to 45° geometry.With internal coolant-lubricant supply, radial outlet (ICR), from M8.Compatible with standard screw-in -holders and adapters.For rhombic indexable inserts 9624A, 9625A, 9635, 9635A, 9635G, 9635R, 9679.Does not include indexable inserts, but torx screws.
International Material Comparison- cutting diameter Ød₁ [mm]:
- 16 mm
- insert size:
- IC-4,6
- number of flutes Z:
- 3
- outside diameter Ød₂:
- 8 mm
- length l₂:
- 25 mm
- specify thread:
- M8
- wrench size:
- SW 10
- mdmax:
- 15 Nm
- category:
- Rhombic
- overall length l₁:
- 43 mm
- neck diameter Ød₃:
- 13 mm
- version:
- Milling Body for Inserts
- product line:
- FRANKEN
- internal coolant supply:
- ICR
- nmax:
- 28,000 1/min
- note:
- without indexabale inserts, with torx-screws
Technical details
- cutting diameter Ød₁ [mm]:
- 16 mm
- insert size:
- IC-4,6
- number of flutes Z:
- 3
- outside diameter Ød₂:
- 8 mm
- length l₂:
- 25 mm
- specify thread:
- M8
- wrench size:
- SW 10
- mdmax:
- 15 Nm
- category:
- Rhombic
- overall length l₁:
- 43 mm
- neck diameter Ød₃:
- 13 mm
- version:
- Milling Body for Inserts
- product line:
- FRANKEN
- internal coolant supply:
- ICR
- nmax:
- 28,000 1/min
- note:
- without indexabale inserts, with torx-screws
cutting diameter Ød₁ [mm]
16 mm
insert size
IC-4,6
number of flutes Z
3
outside diameter Ød₂
8 mm
length l₂
25 mm
specify thread
M8
wrench size
SW 10
mdmax
15 Nm
category
Rhombic
overall length l₁
43 mm
neck diameter Ød₃
13 mm
version
Milling Body for Inserts
product line
FRANKEN
internal coolant supply
ICR
nmax
28,000 1/min
note
without indexabale inserts, with torx-screws