Screw-In End Mill for Rhombic indexable Inserts
9186
Article number 9186.250363 | EAN 4037753441541
-
Unit of measurement: metricRecommended feed directions of the respective cuttersRecommended ramping angleHolders for screw-in end mills
Screw-in milling cutter body 45° for roughing and finishing applications with rhombic indexable inserts (IC 9.2).
Product features and benefits:
Suitable for chamfering due to 45° geometry.With internal coolant-lubricant supply, radial outlet (ICR), from M8.Compatible with standard screw-in -holders and adapters.For rhombic indexable inserts 9624A, 9625A, 9635, 9635A, 9635G, 9635R, 9679.Does not include indexable inserts, but torx screws.
International Material Comparison- cutting diameter Ød₁ [mm]:
- 25 mm
- insert size:
- IC-9,2
- number of flutes Z:
- 3
- outside diameter Ød₂:
- 12 mm
- length l₂:
- 36 mm
- specify thread:
- M12
- wrench size:
- SW 17
- mdmax:
- 50 Nm
- category:
- Rhombic
- overall length l₁:
- 58 mm
- neck diameter Ød₃:
- 21 mm
- version:
- Milling Body for Inserts
- product line:
- FRANKEN
- internal coolant supply:
- ICR
- nmax:
- 30,000 1/min
- note:
- without indexabale inserts, with torx-screws
Technical details
- cutting diameter Ød₁ [mm]:
- 25 mm
- insert size:
- IC-9,2
- number of flutes Z:
- 3
- outside diameter Ød₂:
- 12 mm
- length l₂:
- 36 mm
- specify thread:
- M12
- wrench size:
- SW 17
- mdmax:
- 50 Nm
- category:
- Rhombic
- overall length l₁:
- 58 mm
- neck diameter Ød₃:
- 21 mm
- version:
- Milling Body for Inserts
- product line:
- FRANKEN
- internal coolant supply:
- ICR
- nmax:
- 30,000 1/min
- note:
- without indexabale inserts, with torx-screws
cutting diameter Ød₁ [mm]
25 mm
insert size
IC-9,2
number of flutes Z
3
outside diameter Ød₂
12 mm
length l₂
36 mm
specify thread
M12
wrench size
SW 17
mdmax
50 Nm
category
Rhombic
overall length l₁
58 mm
neck diameter Ød₃
21 mm
version
Milling Body for Inserts
product line
FRANKEN
internal coolant supply
ICR
nmax
30,000 1/min
note
without indexabale inserts, with torx-screws