Screw-In End Mill for Rhombic indexable Inserts

9186

Article number 9186.250363 | EAN 4037753441541

  • Unit of measurement: metric
    Recommended feed directions of the respective cutters
    Recommended ramping angle
    Holders for screw-in end mills

Screw-in milling cutter body 45° for roughing and finishing applications with rhombic indexable inserts (IC 9.2).

Product features and benefits:

Suitable for chamfering due to 45° geometry.
With internal coolant-lubricant supply, radial outlet (ICR), from M8.
Compatible with standard screw-in -holders and adapters.
For rhombic indexable inserts 9624A, 9625A, 9635, 9635A, 9635G, 9635R, 9679.
Does not include indexable inserts, but torx screws.

International Material Comparison
cutting diameter Ød₁ [mm]:
25 mm
insert size:
IC-9,2
number of flutes Z:
3
outside diameter Ød₂:
12 mm
length l₂:
36 mm
specify thread:
M12
wrench size:
SW 17
mdmax:
50 Nm
category:
Rhombic
overall length l₁:
58 mm
neck diameter Ød₃:
21 mm
version:
Milling Body for Inserts
product line:
FRANKEN
internal coolant supply:
ICR
nmax:
30,000 1/min
note:
without indexabale inserts, with torx-screws
Technical details
cutting diameter Ød₁ [mm]:
25 mm
insert size:
IC-9,2
number of flutes Z:
3
outside diameter Ød₂:
12 mm
length l₂:
36 mm
specify thread:
M12
wrench size:
SW 17
mdmax:
50 Nm
category:
Rhombic
overall length l₁:
58 mm
neck diameter Ød₃:
21 mm
version:
Milling Body for Inserts
product line:
FRANKEN
internal coolant supply:
ICR
nmax:
30,000 1/min
note:
without indexabale inserts, with torx-screws
cutting diameter Ød₁ [mm]
25 mm
insert size
IC-9,2
number of flutes Z
3
outside diameter Ød₂
12 mm
length l₂
36 mm
specify thread
M12
wrench size
SW 17
mdmax
50 Nm
category
Rhombic
overall length l₁
58 mm
neck diameter Ød₃
21 mm
version
Milling Body for Inserts
product line
FRANKEN
internal coolant supply
ICR
nmax
30,000 1/min
note
without indexabale inserts, with torx-screws
Show all