HSS End Mill TOP-Cut

1006

Article number 1006.044 | EAN 4037753035849

  • Unit of measurement: metric
    without chip breaker
    Sharp-edged
    Recommended feed directions of the respective cutters

HSS end mill Top-Cut, DIN 844, in long design, for finishing operations in almost all steel materials and non-ferrous metals.

Product features and benefits:

N-cutting edge profile for smooth surfaces.
Sharp-edged design for universal use, wide range of dimensions, centre-cutting up to Ø 28 mm.

International Material Comparison
cutting diameter Ød₁ [mm]:
44 mm
cutting tolerance:
k10
cutting length l₂ [mm]:
125 mm
neck length l₃ [mm]:
142 mm
overall length l₁:
217 mm
neck diameter Ød₃:
38 mm
shank diameter Ød₂ [mm]:
40 mm
shank diameter tolerance:
h6
number of flutes Z:
8
cutting material:
HSSE
category:
End Mill
version:
Flat Face (Sharp-Edged)
product line:
FRANKEN TOP-Cut
tool interface:
straight shank
tool interface norm:
DIN 1835
coating:
without coating
internal coolant supply:
without internal cooling
helix angle:
30 deg
note:
feed direction only radial
Technical details
cutting diameter Ød₁ [mm]:
44 mm
cutting tolerance:
k10
cutting length l₂ [mm]:
125 mm
neck length l₃ [mm]:
142 mm
overall length l₁:
217 mm
neck diameter Ød₃:
38 mm
shank diameter Ød₂ [mm]:
40 mm
shank diameter tolerance:
h6
number of flutes Z:
8
cutting material:
HSSE
category:
End Mill
version:
Flat Face (Sharp-Edged)
product line:
FRANKEN TOP-Cut
tool interface:
straight shank
tool interface norm:
DIN 1835
coating:
without coating
internal coolant supply:
without internal cooling
helix angle:
30 deg
note:
feed direction only radial
cutting diameter Ød₁ [mm]
44 mm
cutting tolerance
k10
cutting length l₂ [mm]
125 mm
neck length l₃ [mm]
142 mm
overall length l₁
217 mm
neck diameter Ød₃
38 mm
shank diameter Ød₂ [mm]
40 mm
shank diameter tolerance
h6
number of flutes Z
8
cutting material
HSSE
category
End Mill
version
Flat Face (Sharp-Edged)
product line
FRANKEN TOP-Cut
tool interface
straight shank
tool interface norm
DIN 1835
coating
without coating
internal coolant supply
without internal cooling
helix angle
30 deg
note
feed direction only radial
Cutting Values | CAM