HSS End Mill
1593
Item number 1593.018
HSS end mill in medium-length design for roughing operations in light and non-ferrous metals.
Product features and benefits:
WR cutting profile with round chip breakers for high material removal and to avoid chip accumulation.Centre-cutting, low cutting forces.Particularly efficient for drill milling, slot milling and pocket milling.
International comparison of workpiece materials- cutting diameter Ød₁ [mm]:
- 18 mm
- cutting tolerance:
- k12
- cutting length l₂ [mm]:
- 48 mm
- neck length l₃ [mm]:
- 58 mm
- overall length l₁:
- 108 mm
- neck diameter Ød₃:
- 15 mm
- shank diameter Ød₂ [mm]:
- 16 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 3
- cutting material:
- HSSE
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- product Line:
- FRANKEN
- tool interface:
- straight shank
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 36 deg
Technical details
- cutting diameter Ød₁ [mm]:
- 18 mm
- cutting tolerance:
- k12
- cutting length l₂ [mm]:
- 48 mm
- neck length l₃ [mm]:
- 58 mm
- overall length l₁:
- 108 mm
- neck diameter Ød₃:
- 15 mm
- shank diameter Ød₂ [mm]:
- 16 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 3
- cutting material:
- HSSE
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- product Line:
- FRANKEN
- tool interface:
- straight shank
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 36 deg
cutting diameter Ød₁ [mm]
18 mm
cutting tolerance
k12
cutting length l₂ [mm]
48 mm
neck length l₃ [mm]
58 mm
overall length l₁
108 mm
neck diameter Ød₃
15 mm
shank diameter Ød₂ [mm]
16 mm
shank diameter tolerance
h6
number of flutes Z
3
cutting material
HSSE
category
End Mill
version
Flat Face (Bevelled Edge)
product Line
FRANKEN
tool interface
straight shank
coating
without coating
internal coolant supply
without internal cooling
helix angle
36 deg
Downloads to the product
- 2D-tool drawing as per DIN SPEC 69874 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D-tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D-tool documentation DE (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D-tool documentation EN (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active