Carbide end mill TOP-CUT | Emuge Franken Website

TOP-Cut carbide end mill with lateral driving flat and long design for roughing and finishing in almost all materials.

Product features and benefits:

ENORM geometry enables low-vibration machining and universal use in almost all materials and milling processes.
TIALN coating for best possible wear protection and long tool life.

International comparison of workpiece materials

Technical details

cutting diameter Ød₁ [mm]:: 9 mm
cutting tolerance:: f8
cutting length l₂ [mm]:: 22 mm
neck length l₃ [mm]:: 28 mm
length of shank connection l₄:: 30 mm
projecting length lₐ:: 32 mm
overall length l₁:: 72 mm
neck diameter Ød₃:: 8.7 mm
shank diameter Ød₂ [mm]:: 10 mm
shank diameter tolerance:: h5
bevelled edge:: 0.2 mm
number of flutes Z:: 4
cutting material:: HM
category:: End Mill
version:: Flat Face (Bevelled Edge)
product Line:: FRANKEN TOP-Cut
tool interface:: straight shank with side-lock clamping flat
coating:: TIALN
internal coolant supply:: without internal cooling
helix angle:: 34-38 deg

cutting diameter Ød₁ [mm]

9 mm

cutting tolerance

cutting length l₂ [mm]

22 mm

neck length l₃ [mm]

28 mm

length of shank connection l₄

30 mm

projecting length lₐ

32 mm

overall length l₁

72 mm

neck diameter Ød₃

8.7 mm

shank diameter Ød₂ [mm]

10 mm

shank diameter tolerance

bevelled edge

0.2 mm

number of flutes Z

cutting material

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600_N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800_N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N1.2 Aluminium wrought alloys <= 350 N/mm² N1.3 Aluminium wrought alloys <= 550 N/mm² N1.4 Aluminium cast alloys Si <= 7% N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N2.8 Special copper alloys <= 1400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium cast alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N5.2 Tungsten-copper alloys No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found Hard materials Search for value H1.1 High strength steels, hardened steels, hard castings 44 – 50 HRC H1.2 High strength steels, hardened steels, hard castings 50 – 55 HRC H1.3 High strength steels, hardened steels, hard castings 55 – 60 HRC No results found

Unit	Millimeter Inch
Axial depth of cut
Radial depth of cut
maximum RPM	min⁻¹ i

Solid Carbide End Mill TOP-Cut “Enorm”

Product features and benefits:

Downloads to the product