Carbide ball nose end mill | Emuge Franken Website

Carbide ball nose end mill in long design for finishing operations in almost all materials.

Product features and benefits:

Suitable for HSC finishing.
TIALN coating for longer tool life.

International comparison of workpiece materials

Technical details

cutting diameter Ød₁ [mm]:: 8 mm
cutting tolerance:: h10
radius r₁ [mm]:: 4 mm
cutting length l₂ [mm]:: 19 mm
neck length l₃ [mm]:: 25 mm
overall length l₁:: 63 mm
neck diameter Ød₃:: 7.7 mm
shank diameter Ød₂ [mm]:: 8 mm
shank diameter tolerance:: h6
number of flutes Z:: 4
cutting material:: HM
category:: Ball Nose End Mill
version:: Ball Nose
product Line:: FRANKEN
tool interface:: straight shank
coating:: TIALN
internal coolant supply:: without internal cooling
helix angle:: 30 deg

cutting diameter Ød₁ [mm]

8 mm

cutting tolerance

h10

radius r₁ [mm]

4 mm

cutting length l₂ [mm]

19 mm

neck length l₃ [mm]

25 mm

overall length l₁

63 mm

neck diameter Ød₃

7.7 mm

shank diameter Ød₂ [mm]

8 mm

shank diameter tolerance

number of flutes Z

cutting material

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600_N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800_N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N2.8 Special copper alloys <= 1400 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N5.2 Tungsten-copper alloys N5.3 Composite materials No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found

Unit	Millimeter Inch
Axial depth of cut
Radial depth of cut
maximum RPM	min⁻¹ i

Solid Carbide Ball Nose End Mill

Product features and benefits:

Downloads to the product