Milling Technology - End mills

7766 suitable variants

    TOP-Cut carbide end mill in long design for roughing and finishing in almost all materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    34-38 deg

    TOP-Cut carbide end mill in long design for roughing and finishing in almost all materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank
    tool interface norm:
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    35-38 deg

    Multi-Cut carbide end mill in long design, with lateral driving flat and short flute length for high-performance roughing in many materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    45 deg

    Multi-Cut Duplex carbide end mill in long design for high-performance roughing in almost all materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius (Duplex)
    tool interface:
    straight shank
    tool interface norm:
    coating:
    TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg

    TiNox-Cut carbide end mill with lateral driving flat for roughing operations in materials that are difficult to machine.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    coating:
    TIN / TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg

    TiNox-Cut carbide end mill in extra long design for roughing operations in materials that are difficult to machine.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank
    tool interface norm:
    coating:
    TIN / TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg

    Alu-Cut carbide end mill with lateral driving flat and long design for roughing and finishing in wrought aluminium alloys and copper alloys.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    coating:
    GLT
    internal coolant supply:
    without internal cooling
    helix angle:
    38-40 deg

    Alu-Cut carbide end mill in long design for roughing in wrought aluminium alloys and copper alloys.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    coating:
    GLT
    internal coolant supply:
    without internal cooling
    helix angle:
    40 deg

    Hard-Cut carbide end mill in extra long design for finishing in high-strength materials up to 66 HRC.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    50 deg

    Hard-Cut carbide torus end mill for finishing applications in many materials, including hard materials.

    cutting material:
    HM
    category:
    Torus End Mill
    tool interface:
    straight shank
    tool interface norm:
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    0 deg