Solid Carbide End Mill Multi-Cut “Duplex”
2616AT
-
_Web_Typ_NR_fein.svg)
with round, fine chip breaker
_Web_Stirnkontur_R3D.svg)
Radius to be programmed in CAM
_Web_Vorschub_radial-diagonal.svg)
Recommended feed directions of the respective cutters
_Web_Rampenwinkel_3-5.svg)
Recommended ramping angle
Multi-Cut Duplex carbide end mill in extra long design and with SAFE-LOCK™ system for high-performance roughing in almost all materials.
Product features and benefits:
Duplex geometry combines HPC and HFC geometry, enabling 2D and 3D machining with a single tool.Very low cutting forces and vibrations due to variable spacing and NR cutting profile.Excellent for roughing under unstable conditions.
International comparison of workpiece materials- cutting material:
- carbide
- category:
- End Mill, High Feed Cutter
- version:
- Corner Radius (Duplex)
- tool interface:
- straight shank with pull-out protection (Safe-Lock)
- coating:
- TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
Technical details
- cutting material:
- carbide
- category:
- End Mill, High Feed Cutter
- version:
- Corner Radius (Duplex)
- tool interface:
- straight shank with pull-out protection (Safe-Lock)
- coating:
- TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
cutting material
carbide
category
End Mill, High Feed Cutter
version
Corner Radius (Duplex)
tool interface
straight shank with pull-out protection (Safe-Lock)
coating
TIALN
internal coolant supply
ICA
helix angle
45 deg