HSS End Mill
1591C
Article number 1591C.032 | EAN 4037753467510
-
Unit of measurement: metric
with round, coarse chip breaker
Corner protection chamfer (bevelled edge) for stabilisation of the edge
Recommended feed directions of the respective cutters
HSS end mill, DIN 844, for roughing operations in light and non-ferrous metals.
Product features and benefits:
WR cutting profile with round chip breakers for high material removal and to avoid chip accumulation.Centre-cutting, low cutting forces.Particularly efficient for drill milling, slot milling and pocket milling.TICN coating for longer tool life.
International comparison of workpiece materials- cutting diameter Ød₁ [mm]:
- 32 mm
- cutting tolerance:
- k12
- cutting length l₂ [mm]:
- 53 mm
- neck length l₃ [mm]:
- 70 mm
- overall length l₁:
- 133 mm
- neck diameter Ød₃:
- 31 mm
- shank diameter Ød₂ [mm]:
- 32 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 3
- cutting material:
- HSSE
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- product line:
- FRANKEN
- tool interface:
- straight shank
- tool interface norm:
- DIN 1835
- coating:
- TICN
- internal coolant supply:
- without internal cooling
- helix angle:
- 36 deg
Technical details
- cutting diameter Ød₁ [mm]:
- 32 mm
- cutting tolerance:
- k12
- cutting length l₂ [mm]:
- 53 mm
- neck length l₃ [mm]:
- 70 mm
- overall length l₁:
- 133 mm
- neck diameter Ød₃:
- 31 mm
- shank diameter Ød₂ [mm]:
- 32 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 3
- cutting material:
- HSSE
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- product line:
- FRANKEN
- tool interface:
- straight shank
- tool interface norm:
- DIN 1835
- coating:
- TICN
- internal coolant supply:
- without internal cooling
- helix angle:
- 36 deg
cutting diameter Ød₁ [mm]
32 mm
cutting tolerance
k12
cutting length l₂ [mm]
53 mm
neck length l₃ [mm]
70 mm
overall length l₁
133 mm
neck diameter Ød₃
31 mm
shank diameter Ød₂ [mm]
32 mm
shank diameter tolerance
h6
number of flutes Z
3
cutting material
HSSE
category
End Mill
version
Flat Face (Bevelled Edge)
product line
FRANKEN
tool interface
straight shank
tool interface norm
DIN 1835
coating
TICN
internal coolant supply
without internal cooling
helix angle
36 deg
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation EN (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active