HSS End Mill

1593C

Article number 1593C.018 | EAN 4037753515457

  • Unit of measurement: metric
    with round, coarse chip breaker
    Corner protection chamfer (bevelled edge) for stabilisation of the edge
    Recommended feed directions of the respective cutters

HSS end mill in medium-length design for roughing in light metals and non-ferrous metals.

Product features and benefits:

WR cutting edge profile with round chip dividers for high material removal and to prevent chip jams.
Centre cutting, low cutting forces.
Particularly efficient for drill milling, slotting - and pocket milling.
TICN coating for longer tool life.

International Material Comparison
cutting diameter Ød₁ [mm]:
18 mm
cutting tolerance:
k12
cutting length l₂ [mm]:
48 mm
neck length l₃ [mm]:
58 mm
overall length l₁:
108 mm
neck diameter Ød₃:
15 mm
shank diameter Ød₂ [mm]:
16 mm
shank diameter tolerance:
h6
number of flutes Z:
3
cutting material:
HSSE
category:
End Mill
version:
Flat Face (Bevelled Edge)
product line:
FRANKEN
tool interface:
straight shank
tool interface norm:
DIN 1835
coating:
TICN
internal coolant supply:
without internal cooling
helix angle:
36 deg
Technical details
cutting diameter Ød₁ [mm]:
18 mm
cutting tolerance:
k12
cutting length l₂ [mm]:
48 mm
neck length l₃ [mm]:
58 mm
overall length l₁:
108 mm
neck diameter Ød₃:
15 mm
shank diameter Ød₂ [mm]:
16 mm
shank diameter tolerance:
h6
number of flutes Z:
3
cutting material:
HSSE
category:
End Mill
version:
Flat Face (Bevelled Edge)
product line:
FRANKEN
tool interface:
straight shank
tool interface norm:
DIN 1835
coating:
TICN
internal coolant supply:
without internal cooling
helix angle:
36 deg
cutting diameter Ød₁ [mm]
18 mm
cutting tolerance
k12
cutting length l₂ [mm]
48 mm
neck length l₃ [mm]
58 mm
overall length l₁
108 mm
neck diameter Ød₃
15 mm
shank diameter Ød₂ [mm]
16 mm
shank diameter tolerance
h6
number of flutes Z
3
cutting material
HSSE
category
End Mill
version
Flat Face (Bevelled Edge)
product line
FRANKEN
tool interface
straight shank
tool interface norm
DIN 1835
coating
TICN
internal coolant supply
without internal cooling
helix angle
36 deg
Cutting Values | CAM